• 1. Welcome
• 2. Presentation
  • 2.1. Software Overview
  • 2.2. Types of Sounds
• 3. Audio Output Configuration
  • 3.1. Setting the Audio Output Parameters
  • 3.2. Audio Output Modes
  • 3.3. Creating a Multichannel Audio Output Configuration
  • 3.4. Correcting the Frequency Response(s)
  • 3.5. Checking the Output Sound
• 4. Driving Environment Configuration
  • 4.1. CAN Mode
    • 4.1.1. Recording CAN Data as a Scenario
  • 4.2. Manual Mode
    • 4.2.1. Controlling Manual Sliders
  • 4.3. Scenario Mode
    • 4.3.1. Creating a Scenario
    • 4.3.2. Playing a Scenario
  • 4.4. Vehicle Data Preprocessing
    • 4.4.1. Vehicle Data Preprocessing Formulas
    • 4.4.2. Configuring Vehicle Data Preprocessing
    • 4.4.3. Editing a Mapper in a Preprocessing Formula
    • 4.4.4. Testing a Preprocessing Formula
  • 4.5. Configuring Wind and Road Noise
• 5. Sound Functions Configuration
  • 5.1. Creating a New Preset
  • 5.2. Configuring a SAF Sound Function
  • 5.3. Configuring an ICE-ASD Sound Function
  • 5.4. Configuring an AVAS Sound Function
  • 5.5. Configuring an ADAS or HMI Sound Function
  • 5.6. Configuring an Ambiance Sound
  • 5.7. Configuring an Oscillator
  • 5.8. Editing a Mapper
  • 5.9. Configuring Adaptive Parametric Equalization
  • 5.10. Setting Preset Gain
  • 5.11. Saving and Loading Individual Players
  • 5.12. Saving a Preset
• 6. Sound Demonstration
  • 6.1. Loading a Preset
  • 6.2. Mute Sound Functions
  • 6.3. Triggering A Sound
  • 6.4. Changing Each Sound Gain
  • 6.5. Recording a General Audio Output
  • 6.6. Rating Presets
• 7. Projects
  • 7.1. Setting Project Gain
  • 7.2. Saving a Project
  • 7.3. Loading a Project
• 8. Auto Start
  • 8.1. Configuring Auto Start
• 9. Exporting ASDforEV Data
  • 9.1. Export Preset Data
  • 9.2. Export Audio Configuration Data
• 10. Troubleshooting
  • 10.1. Software Opening Error
  • 10.2. No Output Sound
  • 10.3. Frequent Audio Artefacts
  • 10.4. Known Issues
  • 10.5. Resolved Issues
• 11. Appendices
  • 11.1. CAN-Reading Software Installation
    • 11.1.1. Installing DewesoftX and its Plugin
    • 11.1.2. Installing NI-XNET
  • 11.2. Ansys Sound: ASDforEV CAN Reader User's Guide
    • 11.2.1. Ansys Sound: ASDforEV CAN Reader Overview
    • 11.2.2. Configuring ASDforEV CAN Reader for Dewesoft Hardware
    • 11.2.3. Configuring ASDforEV CAN Reader for NI Hardware
    • 11.2.4. Setting up CAN Signal Connections
    • 11.2.5. Recording CAN Data Into a File
    • 11.2.6. Replaying a CAN Data Recording File
  • 11.3. Ansys Sound: ASDforEV API Documentation
• 12. Glossary of Terms
  • 12.1. ASDforEV
  • 12.2. ADAS
  • 12.3. Additive synthesis
  • 12.4. AVAS
  • 12.5. Azimuth/Spatialization angle
  • 12.6. CAN
  • 12.7. Filter
    • 12.7.1. Allpass
    • 12.7.2. Bandpass
    • 12.7.3. Bandstop
    • 12.7.4. Highpass
    • 12.7.5. Highshelf
    • 12.7.6. Lowpass
    • 12.7.7. Lowshelf
    • 12.7.8. Peaknotch
    • 12.7.9. Resonant
  • 12.8. Frequency (Hz)
  • 12.9. Gain
  • 12.10. Granular synthesis
  • 12.11. HMI
  • 12.12. ICE
  • 12.13. ICE-ASD
  • 12.14. Looper
  • 12.15. Mapper
    • 12.15.1. Preprocessing mapper
    • 12.15.2. Frequency mapper
    • 12.15.3. Gain mapper
    • 12.15.4. Pitch mapper
  • 12.16. Oscillator
  • 12.17. Parametric Equalizer
  • 12.18. Pink noise
  • 12.19. Pitch/Frequency shift
  • 12.20. Q Factor
  • 12.21. SAF
  • 12.22. Silence duration
  • 12.23. Sine
  • 12.24. Wavetable synthesis
• i. Copyright and Trademark Information