Loading a Preset

This procedure shows how to load a preset to work on the sound functions configuration or to perform a demonstration.

Prerequisites: A preset must have been previously saved. See Saving a Preset.
  1. Go to the Presets tab.
  2. Click Load preset .
  3. Alternatively, you can click the Presets button in the left-hand panel to open a full-screen presets window.
    This window has been designed to allow easy access to ASDforEV presets when using a tablet or touch-screen device.
  4. Select the preset file to load.
The preset is loaded.
Note: Loading a preset also loads the preprocessing formulas stored with it.

You can now play a Scenario or activate the CAN mode to demonstrate the sound functions in a vehicle or in a driving simulator.

While performing a demonstration, you can go the General tab to:

  • mute some sound functions,
  • trigger Ambiance, ADAS and HMI sound functions,
  • activate or deactivate the repeated mode for ADAS and HMI sound functions,
  • change the gain of each sound sample through the Mix table.