Sound Functions Configuration

Sound Functions Configuration

Ansys Sound: ASDforEV allows you to configure SAF, AVAS, ADAS, HMI and Ambiance sound functions and finely tune them.

This section contains the following topics:

Creating a New Preset
This procedure shows how to create a new empty preset.
Configuring a SAF Sound Function
This procedure shows how to create a SAF sound function, and to edit its wavetable, additive and granular synthesis layers.
Configuring an ICE-ASD Sound Function
This procedure shows how to create an ICE-ASD sound in Ansys Sound: ASDforEV. It creates harmonics matched to the engine orders, derived from the engine RPM.
Configuring an AVAS Sound Function
This procedure shows how to configure an AVAS sound function and to edit its wavetable and granular synthesis layers.
Configuring an ADAS or HMI Sound Function
This procedure shows how to configure ADAS or HMI sound functions.
Configuring an Ambiance Sound
This procedure shows how to configure an Ambiance sound function for a vehicle.
Configuring an Oscillator
This procedure shows you how to configure an oscillator to change the waveform shape and adjust the duty cycle and gain.
Editing a Mapper
This procedure shows you how to edit a mapper to adjust the gain, the pitch or the frequency of a sound function according to a specific input driving parameter.
Configuring Adaptive Parametric Equalization
This section describes the function and setup for the adaptive parametric equalizer that is available for sound sources in Ansys Sound: ASDforEV.
Setting Preset Gain
This section describes the function of the preset gain setting.
Saving and Loading Individual Players
This procedure shows how to save individual loopers, mappers, granulators and oscillators.
Saving a Preset
This procedure shows how to save your current set of sound samples and their settings, such as mappers, gains, and spatialization.

« Configuring Wind and Road Noise

Creating a New Preset »

Contains proprietary and confidential information of ANSYS, Inc. and its subsidiaries and affiliates.

Release 2024 R2 - © ANSYS, Inc. All rights reserved