Checking the Output Sound

This procedure shows you to how verify that the audio output is correctly configured and that the sound comes out correctly.

  1. Click the speaker button to turn on the audio output.
    The speaker button turns light blue .
  2. Select the Settings tab.
  3. Click the Speaker check button.
  4. Click the number corresponding to the audio channel to check.
A Pink noise is played on the selected audio output channel.

The main ASDforEV user interface also displays a small VU meter for each defined audio channel, and the signal is represented in green on active channels as shown below.

Note: If you do not hear any sound refer to No Output Sound; if you hear audio artefacts, refer to Frequent Audio Artefacts.