/Collapse all
- E - Defines an element by node connectivity.
- EALIVE - Reactivates an element (for the birth and death capability).
- ECPCHG - Optimizes degree-of-freedom usage in a coupled acoustic model.
- EDELE - Deletes selected elements from the model.
- /EDGE - Displays only the common lines (“edges”) of an object.
- EEMBED - Generates bonded connections between intersecting elements.
- EENS - Evaluates element solutions based on assumed element deformation.
- EEXTRUDE - Extrudes 2D plane elements into 3D solids during a 2D to 3D analysis.
- /EFACET - Specifies the number of facets per element edge for PowerGraphics displays.
- EGEN - Generates elements from an existing pattern.
- EGID - Specifies a global identifier for a set of MESH200 elements.
- *EIGEN - Performs a modal solution with unsymmetric or damping matrices.
- EINFIN - Generates structural infinite elements from selected nodes.
- EINTF - Defines two-node elements between coincident or offset nodes.
- EKILL - Deactivates an element (for the birth and death capability).
- ELBOW - Specifies degrees of freedom to be coupled for end release and applies section constraints to elbow elements.
- ELEM - Specifies "Elements" as the subsequent status topic.
- ELIST - Lists the elements and their attributes.
- *ELSE - Separates the final if-then-else block.
- *ELSEIF - Separates an intermediate if-then-else block.
- EMAGERR - Calculates the relative error in an electrostatic or electromagnetic field analysis.
- EMATWRITE - Forces the writing of all the element matrices to Jobname.emat.
- EMF - Calculates the electromotive force (emf), or voltage drop along a predefined path.
- EMFT - Summarizes electromagnetic forces and torques.
- EMID - Adds or removes midside nodes.
- EMIS - Specifies emissivity as a material property for the Radiation Matrix method.
- EMODIF - Modifies a previously defined element.
- EMORE - Adds more nodes to the just-defined element.
- EMSEL - Selects a group of reinforcing members via a predefined global identifier.
- EMSYM - Specifies circular symmetry for electromagnetic sources.
- EMTGEN - Generates a set of TRANS126 elements.
- EMUNIT - Specifies the system of units for magnetic field problems.
- EN - Defines an element by its number and node connectivity.
- /ENCRYPT - Controls encryption of command input.
- *END - Closes a macro file.
- *ENDDO - Ends a do-loop and starts the looping action.
- *ENDIF - Ends an if-then-else.
- ENDRELEASE - Specifies degrees of freedom to be decoupled for end release.
- ENERSOL - Specifies the total energies to be stored.
- ENGEN - Generates elements from an existing pattern.
- ENORM - Reorients shell element normals or line element node connectivity.
- ENSYM - Generates elements by symmetry reflection.
- /EOF - Exits the file being read.
- EORIENT - Reorients solid element normals.
- EPLOT - Produces an element display.
- EQSLV - Specifies the type of equation solver.
- ERASE - Explicitly erases the current display.
- /ERASE - Specifies that the screen is to be erased before each display.
- EREAD - Reads elements from a file.
- EREFINE - Refines the mesh around specified elements.
- EREINF - Generates reinforcing elements from selected existing (base) elements.
- ERESX - Specifies extrapolation of integration-point results.
- ERNORM - Controls error estimation calculations.
- ERRANG - Specifies the element range to be read from a file.
- ESCHECK - Perform element shape checking for a selected element set.
- ESEL - Selects a subset of elements.
- /ESHAPE - Displays elements with shapes determined from the real constants, section definition, or other inputs.
- ESIZE - Specifies the default number of line divisions.
- ESLA - Selects those elements associated with the selected areas.
- ESLL - Selects those elements associated with the selected lines.
- ESLN - Selects those elements attached to the selected nodes.
- ESLV - Selects elements associated with the selected volumes.
- ESOL - Specifies element data to be stored from the results file.
- ESORT - Sorts the element table.
- ESTIF - Specifies the matrix multiplier for deactivated elements.
- ESURF - Generates elements overlaid on the free faces of selected nodes.
- ESYM - Generates elements from a pattern by a symmetry reflection.
- ESYS - Sets the element coordinate system attribute pointer.
- ET - Defines a local element type from the element library.
- ETABLE - Fills a table of element values for further processing.
- ETCHG - Changes element types to their corresponding types.
- ETCONTROL - Control the element technologies used in element formulation (for applicable elements).
- ETDELE - Deletes element types.
- ETLIST - Lists currently defined element types.
- ETYPE - Specifies "Element types" as the subsequent status topic.
- EUSORT - Restores original order of the element table.
- EWRITE - Writes elements to a file.
-
EXBOPT
- Specifies
.exbfile output options in a CMS generation pass. - *EXIT - Exits a do-loop.
- /EXIT - Stops the run and returns control to the system.
- EXOPTION - Specifies the EXPROFILE options for the Mechanical APDL to Ansys CFX or Ansys Fluent profile file transfer.
- EXP - Forms the exponential of a variable.
- EXPAND - Displays the results of a modal cyclic symmetry analysis.
- /EXPAND - Allows the creation of a larger graphic display than represented by the actual finite element analysis model.
- EXPASS - Specifies an expansion pass of an analysis.
- *EXPORT - Exports a matrix to a file in the specified format.
- EXPROFILE - Exports Mechanical APDL interface data on selected nodes to an Ansys CFX or Ansys Fluent Profile file.
- EXPSOL - Specifies the solution to be expanded for mode-superposition analyses or substructure analyses.
- EXTOPT - Controls options relating to the generation of volume elements from area elements.
- EXTREM - Lists the extreme values for variables.
- EXUNIT - Specifies the interface data unit labels to be written to the profile file from Mechanical APDL to Ansys CFX transfer.