The following material properties are not available via the material property menus of the interactive GUI. You can specify them from the command line or input file. Subsequent graphic display and postprocessing is still displayed.
TB
Command Lab Value | Material Property |
|---|---|
| AFDM | Acoustic frequency dependent material |
| AHYPER | Anisotropic hyperelasticity |
| BB | Bergstrom-Boyce |
| CDM | Mullins effect |
| CGCR | Crack growth fracture criterion |
| CTE |
Coefficient of thermal expansion |
| CZM | Cohesive zone |
| DENS | Mass density |
| DMGE | Damage evolution law |
| DMGI | Damage initiation criteria |
| EDP | Extended Drucker-Prager |
| ELASTIC | Elasticity |
| EXPE | Experimental data |
| FCLI | Failure criteria material strength limits |
| FLUID | Fluid |
| FRIC | Coefficient of friction |
| GURSON | Gurson pressure-dependent plasticity |
| INTER | User-defined contact interaction |
| MPLANE | Microplane |
| NLISO,,,,POWER | Nonlinear isotropic hardening with power hardening law |
| PERF | Acoustic perforated medium |
| PM | Porous media |
| WEAR | Contact surface wear |