In this tutorial, you will generate a hexa mesh for a three-dimensional elbow intersected internally by a cylinder.
This tutorial demonstrates how to do the following:
Prepare the geometry.
Block the geometry.
Split the blocks.
Fit the computational domain to the geometry.
Create the first Ogrid.
Create the second Ogrid.
Generate the mesh.
Verify and save the mesh.
- Starting the Project
- Step 1: Preparing the Geometry
- Step 2: Blocking the Geometry
- Step 3: Fitting the Blocking to the Geometry
- Step 4: Creating the First Ogrid
- Step 5: Adjust the Ogrid Edge Length to Improve Quality
- Step 6: Generate the Pre-Mesh
- Step 7: Creating the Second Ogrid
- Step 8: Generating the Mesh
- Step 9: Saving the Project