If you are familiar with the Aqwa data files and help system, then you can use this section to find where an existing command is located in the Aqwa Editor tree objects.
Table 9.1: Cross reference of tree objects with Aqwa commands
| Aqwa Manual Reference | Aqwa Editor Tree Object |
|---|---|
| 4.0 - Deck 0 – Preliminary Deck | |
| 4.0.0 General Description | Project |
| 4.0.1 JOB Card | Analysis |
| 4.0.2 TITLE Card | Project |
| 4.0.3 OPTIONS Card | Analysis Settings |
| 4.0.4 RESTART Card | Analysis |
| 4.1 - Deck 1 – (COOR) – Coordinate Positions | |
| 4.1.0 General Description | |
| 4.1.1 Deck Header | |
| 4.1.2 COORDINATE Card | Mesh, Mesh Sizing |
| 4.1.3 COORDINATE Card with Rotation Node Generation | Not Supported |
| 4.1.4 COORDINATE STRUCTURE Card | Parts (Structures) |
| 4.1.5 COORDINATE OFFSET card | Not Supported |
| 4.1.6 COORDINATE card with TRANSLATION | Not Supported |
| 4.1.7 COORDINATE Card with Mirror Node Gen | Not Supported |
| 4.1.8 NOD5 card - 5-digit node numbers | Always enabled |
| 4.2 Deck 2 (ELM*) – Element Topology | |
| 4.2.0 General Description | |
| 4.2.1 Deck Header | |
| 4.2.2 ELEMENT TOPOLOGY Card | Mesh, Mesh Sizing, Line Bodies, Point Mass, Point Buoyancy, Disc |
| 4.2.3 SYMX and SYMY - X and Y Symmetry Cards | Not Supported |
| 4.2.4 HYDI card - Hydrodynamic Interaction | Structure Selection |
| 4.2.5 RMXS/RMYS cards - Remove Symmetry | Not Supported |
| 4.2.6 MSTR Card - Move Structure | Not Supported |
| 4.2.7 FIXD Card - Fix Structure | Parts (Structures) |
| 4.2.9 VLID Card - Suppression of Standing Waves | Parts (Structures), Surface Bodies |
| 4.2.10 ASYM Axi-Symmetric Structure Generation | Not Supported |
| 4.2.11 ILID Card - Suppression of Irregular Frequencies | Surface Bodies |
| 4.2.12 ZLWL Card - Waterline Height | Geometry |
| 4.3 Deck 3 (MATE) – Material Properties | |
| 4.3.0 General Description | |
| 4.3.1 Deck Header | |
| 4.3.2 MATERIAL PROPERTY Card | Line Bodies, Point Mass, Point Buoyancy, Disc |
| 4.4 Deck 4 (GEOM) – Geometric Properties | |
| 4.4.0 General Description | |
| 4.4.1 Deck Header | |
| 4.4.2 GEOMETRIC Property and CONTINUATION Card | Line Bodies, Point Masses, Point Buoyancy, Disc |
| 4.5 Deck 5 (GLOB) – Global Parameters | |
| 4.5.0 General Description | |
| 4.5.1 Deck Header | |
| 4.5.2 DPTH Card (Optional) - Water Depth | Geometry |
| 4.5.3 DENS Card (Optional) - Water Density | Geometry |
| 4.5.4 ACCG Card (Optional) – Gravitational Acceleration | Geometry |
| 4.6 Deck 6 (FDR*) – Frequencies and Directions Table | |
| 4.6.0 General Description | |
| 4.6.1 Deck Header | |
| 4.6.2 FREQ/PERD/HRTZ Card - Frequencies/Periods at which the Parameters are Defined | Wave Frequencies |
| 4.6.3 DIRN Card - Directions at which the Parameters are Defined | Wave Directions |
| 4.6.4 MVEF Card - Move Existing Freq’ Parameters | Not Supported |
| 4.6.5 DELF Card - Delete Frequency Parameters | Not Supported |
| 4.6.6 CSTR Card - Copy from Structure Number | Not Supported |
| 4.6.7 FILE Card - Copy from File Unit | Not Supported |
| 4.6.8 CPYF/CPYP/CPYH Cards - Copy Freq’ Param’s | Not Supported |
| 4.6.9 CPYS Card - Copy Stiffness Matrix | Not Supported |
| 4.6.10 CPDB Card - Copy Data Base | Not Supported |
| 4.6.11 FWDS Card - Define Forward Speed | Wave Directions |
| 4.7 DECK 7 (WFS*) – Wave Frequency Dependent Parameters and Stiffness Matrix | Parts (Structures), Additional Stiffness, Additional Damping, Additional Added Mass, Connection Stiffness |
| 4.8 DECK 8 (DRC*) – Drift Force Coefficients | Not Supported |
| 4.9 DECK 9 (DRM*) – Drift Motion Parameters | Not Supported |
| 4.10 DECK 10 (HLD*) – Hull Drag Coefficients and Thruster Forces | Current Force Coefficients, Wind Force Coefficients |
| 4.11 DECK 11 (ENVR) – Environmental Parameters | Wind (non spectral definition), Current |
| 4.12 DECK 12 (CONS) – Constraints | Not Supported |
| 4.13 Deck 13 (SPEC) – Spectral Parameters | Irregular Wave, Wind (spectral definition) |
| 4.13N Deck 13 (WAVE) – Regular Wave Parameters | Regular Wave |
| 4.14 Deck 14 (MOOR) – Mooring Lines Description | Cables, Cable Winch, Cable Failure, Analysis Settings |
| 4.15 Deck 15 (STRT) – Starting Conditions | Not Supported |
| 4.15N Deck 15 (STRT) – Starting Conditions (NAUT) | Not Supported |
| 4.15D Deck 15 (STRT) – Starting Conditions (DRIFT) | Not Supported |
| 4.16 Deck 16 (STRT) – Starting Conditions | Not Supported |
| 4.16L Deck 16 (STRT) – Starting Conditions (LINE) | Not Supported |
| 4.16B Deck 16 (STRT) – Starting Conditions (LIBRIUM) | Analysis Settings |
| 4.17 Deck 17 (HYDC) – Hydrodynamic parameters for non diffracting elements | Analysis Settings, Parts (Structures) |
| 4.18 Deck 18 (PROP) – Printing Options | Not Supported |
| 4.21 Deck 21 (ENLD) – Element and Nodal Loads | Not Supported |
| All AqwaWave commands | Not Supported |