Running Simulations
After you specify how Maxwell is to compute the solution, you need to begin the solution process. In general, the Analyze command applies to the selected setup and associated sweeps, if any, or to a select sweep. To use this command, right-click on a setup or sweep in the Project Manager tree, and click the command on the context menu. The Analyze All command applies to all enabled setups at or below the level invoked in the Project Manager tree. To use this command, either click Maxwell 2D or Maxwell 3D > Analyze All or right-click on the Analysis icon in the Project Manager tree and select Analyze All from the popup menu.
What do you want to do?
- Local Analysis
- Solve a single setup with or without sweeps
- Solve a specific sweep
- Enable a queue so that multiple simulations can run sequentially as resources become available.
- Run more than one simulation, whether multiple setups, or multiple sweeps under a single setup, or setups with dependencies.
- Enable or Disable one or more solution setups or sweeps
- Monitor queued simulations
- Configure and run remote analysis
- Configure and run distributed analysis
- RSM Integration with Job Management UI
- Large Scale DSO for Parametric Analysis
- High Performance Computing (HPC) Integration
- Interactive Scheduler Jobs
- Monitor the solution process
- Change a solution priority for system resources
- Abort an analysis
- Re-solve after modifying a design
- Re-solve after Ansys Workbench Feedback
Related Topics
Running an Optimetrics Analysis
High Performance Computing (HPC) Integration
Running Maxwell from a Command Line
Technical Notes: The Solution Process
Running More Than One Simulation