Running More Than One Simulation
To solve every enabled solution setup in a design:
- In the Project Manager tree, under the design you want to solve, select Analysis.
- Click Maxwell 3D > Analyze All or Maxwell 2D > Analyze All.
Each enabled solution setup is solved in the order it appears in the Project Manager tree.
Note: The General
tab for the Setup includes an Enabled check box. By default, this
is checked. Unchecking the Enabled check box excludes a setup
from running.
Note: You can also simulate
all designs in a project by clicking Project > Analyze
All.
To solve two or more sweeps or two or more parametric analyses under a setup:
- In the Project Manager tree, under the design you want to solve, right-click the Setup icon that includes the setups or sweeps of interest.
- Click Analyze on the shortcut menu.
Each solution sweep under that setup is solved in the order it appears in the Project Manager tree, using the available machines.
Related Topics
Technical Notes: Handling Complicated Models