Re-solving after Ansys Workbench Thermal Feedback
With the Enable Feedback box in Setting the Temperature of Objects dialog is checked, you can manage analysis with feedback in Ansys Workbench. After solving a Maxwell design, after performing the corresponding linked thermal analysis in Ansys Workbench, you can receive a temperature distribution back from the thermal solution. Ansys Workbench will write the feedback files directly to the Maxwell Project Solution directory.
After an analysis that includes thermal feedback from Ansys Workbench, you can see temperature changes expressed in Temperature field overlays (both visually in the overlay and in the color key) as well as in the Solution data.
In the Solution data Profile tab you will see a new entry for Maximum Delta T, for the change in temperature from the previous simulation. The solver calculates delta in the first iteration by comparing the temperature distribution output from thermal with the initial temperature setting in Maxwell. Subsequent simulation iterations provide a number for the temperature delta.
This simulation feedback loop from Ansys Electromagnetics to Ansys Workbench and back can continue until you decide that Temperature delta reported in the Solution Report low and stable for the designs.