Viewing Solution Data
While Maxwell is generating a solution or when it is complete, you can view the following types of information about the solution in the Solutions window. The information actually available will vary with the solution type and setup of your design.
- Convergence
information
Note: Because adaptive mesh refinement is not performed for transient solutions, convergence data is not available for Transient analysis.
- Computing resources, or profile information, that were used during the solution process
- Output Parameters (for example Force and Torque), and Matrix Data computed during each adaptive, non-adaptive, or sweep solution
- Mesh data
- State of solved solutions
- Winding results (for eddy current solutions only)
- End Connection results (for eddy current solutions only)
- Loss results (for eddy current solutions only)
To access the Solutions window, in which the information above can be viewed, do one of the following:
- Select Maxwell 3D, Maxwell 2D, or
RMxprt > Results > Solution Data.
- Right-click Results in the Project Manager tree, and then click Solution Data on the shortcut menu.