Viewing End Connection Results (2D Eddy Current)
To view end connection results for Maxwell 2D Eddy current solutions:
- In the Project Manager tree, right-click the Results folder, and then click Solution Data on the shortcut menu.
- The Design Variation box shows the current design. Optionally, click the [...] button, and choose a design variation solved during an optimization or parametric analysis from the Set Design Variation dialog box.
- In the Simulation drop-down menus:
- Select the solution setup from the left drop-down menu.
- Select the solved pass data you wish to view from the right drop-down menu – either the LastAdaptive pass, or an intermediate AdaptivePass. If LastAdaptive is selected, the Freq drop-down menu is enabled for you to choose frequency. If AdaptivePass is selected, the Pass drop-down menu is enabled for you to choose the desired intermediate pass.
- If the design includes end connections, the End Connection tab displays columns for: Induced Voltage[V], and Current[A]. Results listed in these columns are complex quantities. The Format tab allows you to customize how values are displayed by setting the desired width, precision, and whether to use scientific notation.
- Click Close to close the Solutions window.
The Solutions window appears.