Body To DT can be created by converting 3D CAD to Drivetrain's External, Internal, Planetary, Double Pinion Planetary, Cross Helical, and Cycloid Pin GearSet.
Figure 14.17: Rule to define the name of 3D CAD to be defined with a GearSet
| Syntax | |||||||||||||||||||||||||
| "GearSet Type"__"GearSet Name"__"Gear Name"__"Assembly Body Name" | |||||||||||||||||||||||||
| Parameters | |||||||||||||||||||||||||
| GearSet Type |
The command to define the type of GearSet as follows.
| ||||||||||||||||||||||||
| GearSet Name | The name of the GearSet is defined by this parameter.. | ||||||||||||||||||||||||
| Gear Name |
The name of the Gear is defined by this parameter.. If you use a planetary or double pinion planetary gearset, there is the special rule of gear name as follows.
| ||||||||||||||||||||||||
|
Assembly Body Name | The name of the body to which the gear is to be assembled | ||||||||||||||||||||||||
| Example | |||||||||||||||||||||||||
|
- Example of defining a External GearSet to satisfy the following conditions. 1) GearSet Name : GearSet_01 2) Gear type : Spur gear 3) Driving Gear : The name of the gear is Gear1 and must be assembled on the shaft called Input 4) Driven Gear : The name of the gear is Gear2 and must be assembled on the shaft called Output SEXT__GearSet_01__Gear1__Input SEXT__GearSet_01__Gear2__Output - Example of defining a Planetary GearSet to satisfy the following conditions. 1) GearSet Name : PlanetaryGearSet_FRT 2) Gear type : Helical gear 3) Number of planet gears : 3 EA 4) Sun gear must be assembled on the shaft called SunShaft 5) Planet gears must be assembled on the shaft called PlanetShaft_# 6) Ring gear must be assembled on the housing called Housing HSPL__PlanetaryGearSet_FRT__SUN__SunShaft HSPL__PlanetaryGearSet_FRT__PLNT1__PlanetShaft_1 HSPL__PlanetaryGearSet_FRT__PLNT2__PlanetShaft_2 HSPL__PlanetaryGearSet_FRT__PLNT3__PlanetShaft_3 HSPL__PlanetaryGearSet_FRT__RNG__Housing | |||||||||||||||||||||||||
Remarks
1. When a Double Pinion Planetary GearSet is created using Body To DT, the rule of planet gear naming is that the inner planet gears are first and outer planet gears are second.