The Imported CFD Pressure boundary condition enables you to apply the pressure loading data contained in a Fluent-Mechanical coupling data (.cgns) file on the model. The boundary condition maps the complex pressure values contained in the file over structural entities.
This page includes the following sections:
Analysis Types
Imported CFD Pressure is only available for the Harmonic Acoustics analysis type when a Structural Physics Region is defined.
Dimensional Types
The supported dimensional types for the Imported CFD Pressure boundary condition include:
3D Simulation
Geometry Types
The supported geometry types for the Imported CFD Pressure boundary condition include:
Solid
Shell
Topology Selection Options
The supported topology selection options for Imported CFD Pressure include:
Face
Define By Options
Imported CFD Pressure’s loading is defined using the loading data of an imported Fluent-Mechanical coupling data (.cgns) file.
Applying an Imported CFD Pressure Boundary Condition
To apply an Imported CFD Pressure:
On the Environment Context tab, open the Loads drop-down menu and select . Alternatively, right-click the Environment tree object or in the Geometry window and select > > .
Define the Scoping Method as or and then specify the geometry.
Using the CFD Pressure File property, select the desired file for import.
Note: Only one Imported CFD Pressure boundary condition is allowed per Environment.
Details Pane Properties
The selections available in the Details pane are described below.
Category | Property/Options/Description |
---|---|
Scope |
Scoping Method: Options include:
|
Definition |
Type: Read-only property that displays the boundary condition type - Imported CFD Pressure. CFD Pressure File: This property opens a dialog you use to and browse to and select the desired file. Suppressed: Include ( - default) or exclude ( ) the boundary condition. |
Mechanical APDL References and Notes
The following Mechanical APDL commands, element types, and considerations are applicable for this boundary condition.
The pressure loading data is applied using the FLUREAD command by creating the SURF154 element on the selected topology. |
API Reference
For specific scripting information, see the Imported CFD Pressure section of the ACT API Reference Guide.