On clicking generate, the chosen repair method for each fault is executed. After the generation of the feature is complete, the status of each fault can be seen in the fault group header.
Fault Status
Success: If the fault is successfully fixed by the selected repair method then no message is shown in the fault group header.
Failed: If the selected repair method failed then a "Failed" status is shown in the group header.
Error: If the geometry specified in the fault is invalid then an "Error" status is shown in the group header.
Partially Repaired: If the selected repair method is partially successful in fixing a fault then "Partially Repaired" status is shown in the group header.
Note: After Generate, if the output from specified repair method is not satisfactory, you can change the repair method without entering into the Edit Selections mode.
Other Repair topics: