Sending Data to Ansys
You can transfer the active model to Ansys, even if it has not been saved. You can also send data from a document that is open in SpaceClaim or from a saved SpaceClaim document.
Only visible objects are sent to Ansys, hidden objects are not sent.
The following data is transferred to Ansys:
Geometry
Solids
Surfaces
Line bodies (Beams)
When a Beam with Section Anchor type set to Location is transferred to Workbench, its Location becomes a Workbench Offset of type, User Defined. The X and Y offset components will, in general, change to preserve the Beam cross-section position relative to the Beam line. This coordinate transformation is necessary to account for differences between SpaceClaim and Workbench reference frames.
Points
Named Selections (groups)
Driving dimensions (groups)
Ruler dimensions
Pattern count
Driving annotation dimensions
Shell thickness