/Collapse all
- IC - Specifies initial conditions at nodes.
- ICDELE - Deletes initial conditions at nodes.
- ICLIST - Lists the initial conditions.
- /ICLWID - Scales the line width of circuit builder icons.
- ICROTATE - Specifies initial velocity at nodes as a sum of rotation about an axis and translation.
- /ICSCALE - Scales the icon size for elements supported in the circuit builder.
- *IF - Conditionally causes commands to be read.
- IGESIN - Transfers IGES data from a file into Mechanical APDL.
- IGESOUT - Writes solid model data to a file in IGES Version 5.1 format.
- /IMAGE - Allows graphics data to be captured and saved.
- IMAGIN - Forms an imaginary variable from a complex variable.
- IMESH - Generates nodes and interface elements along lines or areas.
- IMMED - Allows immediate display of a model as it is generated.
- INISTATE - Defines initial-state data and parameters.
- *INIT - Initializes a vector or matrix.
- /INPUT - Switches the input file for the commands that follow.
- *INQUIRE - Retrieves properties of an existing APDL Math object.
- /INQUIRE - Returns system information to a parameter.
- INRES - Identifies the data to be retrieved from the results file.
- INRTIA - Specifies "Inertial loads" as the subsequent status topic.
- INT1 - Integrates a variable.
- INVOPT - Enables or disables inverse solving for the current load step.
- IOPTN - Controls options relating to importing a model.
- IRLF - Specifies that inertia relief calculations are to be performed.
- IRLIST - Prints inertia relief summary table.
- *ITENGINE - Performs a solution using an iterative solver.