Managing Time-Domain Window
This procedure shows how to set the general settings at opening for the Time-Domain Window, such as the units or the calibration.
To Manage the Time-Domain Window:
- Click Preferences dialog box. to display the
- Click the Time tab to display the current default settings for the time-domain window.
-
In Default opening
settings, set the Unit to apply when
opening a temporal signal without special information.
- If you know the Calibration information of the required temporal signal, type the value in the Calibration box to convert the digital value in physical unit.
- If you know the constant offset value of the whole signal, type the required value in the Offset box to correct the zero mean.
- Specify the Number of bits per sample to apply when saving a signal in WAV format.
- Click the Miscellaneous tab.
- Set the Default number of cursors to be added to the time-domain window.
- If you want to open several signals in the same window, Check Open multiple files into a same window.
- Click to specify the Word document in .doc format to use when you create an analysis report.
- Click OK.
The general settings for the Time-Domain Window are configured.