Three-Phase Synchronous Machines

After you have selected Three-Phase Synchronous Machines as your model type, you need to define the following:

General data, such as the unit system, power, and voltage.
Stator data, such as the slot types and dimensions, stator diameter, skew width, and laminations.
Optional stator Vent data.
Winding data, such as the parallel branches, conductors, and wire dimensions.
Rotor pole data, such as its associated pole-body dimensions and air gaps.
Optional Rotor damper data, such as the damper dimensions, rings, and material properties.
Rotor winding data and the winding control parameters.
Shaft Data
Optional machine housing.
Solution data, such as specifying motor or generator application, and rated output voltage and frequency.