Viewing Solution Data

While Ansys Electronics Desktop is generating a solution, or when it is complete, you can view the following information about the solution:

• Convergence information.
• Computing resources, or profile information, that were used during the solution process.
• Matrices computed for the S-parameters, impedances, and propagation constants during each adaptive, non-adaptive, or sweep solution.
• Mesh statistics
• For eigenmode solutions, view the real and imaginary parts of the frequency and quality factor Q computed for each eigenmode.
• For Characteristic Modes solutions, a CMA Data tab reports the the Number of Modes, Characteristic Angle and current, Modal Significance and Quality Factor, and Voltage per port based in edit sources weighting.
• The state of solved solutions.
• For transient solutions, Transient Data.

To access the Solution Data window, in which the information above can be accessed, do one of the following:

• Click HFSS> Results> Solution Data.
• Right-click Results in the Project Manager, and then click Solution Data on the shortcut menu.
• Select the Results tab on the ribbon, and click the Solution Data icon.