Step 7: Verifying and Saving the Mesh

  1. Check the mesh quality.

    Blocking > Pre-Mesh Quality Histograms  

    If you are satisfied with the mesh quality, convert the existing mesh to an unstructured mesh.

  2. Save the mesh in unstructured format.

     Blocking > Pre-Mesh > Convert to Unstruct Mesh

    This saves the .uns file as the mesh in the working directory and automatically loads it.

  3. Save the blocking file (sphere-cube-final.blk).

    File > Blocking > Save Blocking As...

  4. Save the project file (sphere—cube-final.prj).

    File > Save Project As...

  5. Exit the current session.

    File > Exit