PCIRC

PCIRC, RAD1, RAD2, THETA1, THETA2
Creates a circular area centered about the working plane origin.

PREP7: Primitives

RAD1, RAD2: Inner and outer radii (either order) of the circle. A value of either zero or blank for either RAD1 or RAD2, or the same value for both RAD1 and RAD2, defines a solid circle.
THETA1, THETA2: Starting and ending angles (either order) of the circular area. Used for creating a circular sector. The sector begins at the algebraically smaller angle, extends in a positive angular direction, and ends at the larger angle. The starting angle defaults to 0.0° and the ending angle defaults to 360.0°. See the Modeling and Meshing Guide for an illustration.

Notes

Defines a solid circular area or circular sector centered about the working plane origin. For a solid circle of 360°, the area will be defined with four keypoints and four lines. See the CYL4 and CYL5 commands for alternate ways to create circles.

Menu Paths

Main Menu>Preprocessor>Modeling>Create>Areas>Circle>By Dimensions