Orient Ribbon Group

The Orient ribbon group contains the following tools:

	Use the Home tool to return the orientation of your design to the default, trimetric view. You can customize the Home view to show your design with any orientation, location, and zoom level.
	Click the Plan View tool to display a head-on view of the sketch grid or the select plane or planar face. Alt+select an edge to orient the plan view horizontally or vertically.
	You can use the Spin tool to re-orient your design in any direction. Spinning your design allows you to view it from any angle.
	Use the Pan tool to move your design within the Design window.
	Use the Zoom tool to display your design closer or farther away in the Design window. You can zoom the design to fill the Design window, zoom into an area, or zoom in or out a preset amount.
	Use the View tool to display a trimetric or isometric view of your design. You can also display a head-on view of the top, bottom, front, back, right, or left side.
	Use the Snap View tool to display a head-on view of a face. You can also use the tool to "throw" the highlighted face to the top, bottom, right, or left by dragging it toward the edge of the Design window.
	Use the Rotate tool to rotate your design 90 degrees in the plane of the screen. You can rotate your design clockwise or counterclockwise.
	Use the Next and Previous arrows (or left/right arrows on your keyboard, or browser next/previous buttons) to change your view to the previous or next orientations.

This section contains the following topics: