Edit Ribbon Group
The Edit ribbon group contains the following tools:
|
Use the Select tool to select 2D or 3D objects in your design for editing. You can select vertices, edges, curves, planes, axes, faces, surfaces, rounds, solids, and components in 3D. In 2D, you can select points and lines. You can also select circle and ellipse centers, the midpoints of lines and edges, and the internal points and end points of splines. The Select tool can also be used to edit a sketch. |
|
Use the Pull tool to offset, extrude, revolve, sweep, draft, scale, drape, and blend faces; use it to round, chamfer, or extrude edges. |
|
Use the Move tool to move one or more faces, surfaces, solids, or components. The behavior of the Move tool changes based on what you have selected. |
|
Use the Fill tool to fill in the selected faces with the surrounding surface or solid. The region must be completely surrounded to be filled. You can also use the Fill tool to patch new surfaces through loops of edges. |
|
Use the Replace tool to replace one face (or multiple faces) with another face (or faces). You can also use it to simplify a spline face that is very similar to a cylinder or plane, or to align a set of planar faces that are almost aligned. |
|
You can edit any face or surface with Tweak Face to change its surface geometry. This tool is available in 3D mode and in drawings. |