161
Podowski, M. Z., Alajbegovic, A., Kurul, N., Drew, D.A. and Lahey, R. T.,
"Mechanistic modelling of CHF in forced-convection sub-cooled boiling",
Int. Conference on Convective Flow and Pool Boiling, Irsee, Germany, 1997a.
162
Podowski, R. M., Drew, D.A., Lahey, R. T. and Podowski, M. Z.,
"A mechanistic model of the ebullition cycle in forced-convection sub-cooled boiling",
NURETH-8, Kyoto, Japan, 1997b.
163
Egorov, Y. and Menter, F.,
"Experimental implementation of the RPI boiling model in CFX-5.6",
Technical Report ANSYS / TR-04-10., 2004.
164
Lemmert, M. and Chawla, J. M.,
"Influence of flow velocity on surface boiling heat transfer coefficient",
Heat Transfer and Boiling (Eds. E. Hahne and U. Grigull), Academic Press, 1977.
165
Tolubinski, V. I. and Kostanchuk, D. M.,
"Vapour bubbles growth rate and heat transfer intensity at subcooled water boiling",
4th. International Heat Transfer Conference, Paris, France, 1970.
166
Cole, R.,
"A photographic study of pool boiling in the region of CHF",
AIChEJ, 6 pp. 533-542, 1960.
167
Mikic, B. B. and Rohsenow, W. M.,
"A new correlation of pool boiling data including the fact of heating surface characteristics",
ASME J. Heat Transfer, 91 pp. 245-250, 1969.
168
Del Valle, V. H. and Kenning, D. B. R.,
"Subcooled flow boiling at high heat flux",
Int. J. Heat Mass Transfer, 28 p. 1907, 1985.
169
Ceumern-Lindenstjerna, W. C.,
"Bubble Departure and Release Frequencies During Nucleate Pool Boiling of Water and Aqueous NaCl Solutions",
Heat Transfer in Boiling, Academic Press and Hemisphere, 1977.
170
Saffman, P. G.,
Corrigendum to: "The lift on a small sphere in a slow shear flow",
J. Fluid Mech., 31, p. 624, 1968
171
Legendre, D. and Magnaudet, J.,
"The lift force on a spherical bubble in a viscous linear shear flow",
J. Fluid Mech., 368, pp. 81–126, 1998.
172
Tomiyama, A.,
"Struggle with computational bubble dynamics",
ICMF'98, 3rd Int. Conf. Multiphase Flow, Lyon, France, pp. 1-18, June 8-12, 1998.
173
Frank, Th., Shi, J. M. and Burns, A. D.,
"Validation of Eulerian Multiphase Flow Models for Nuclear Safety Applications",
3rd International Symposium on Two-Phase Flow Modelling and Experimentation, Pisa, Italy, 22-24, Sept. 2004.
174
Wellek, R. M., Agrawal, A. K. and Skelland, A. H. P.,
"Shapes of liquid drops moving in liquid media",
AIChE J, 12, pp. 854-862, 1966.
175
G. Elsässer,
"Experimentelle Untersuchung und numerische Modellierung der freien Kraftstoffstrahlausbreitung und Wandinteraktion unter motorischen Randbedingungen",
Dissertation, Logos Verlag, Berlin, 2001
176
C. Bai and A.D. Gosman,
"Prediction of spray wall impingement in reciprocating engines",
ILASS-Europe, July 1999
177
Frank, Th., Zwart, P. J., Krepper, E., Prasser, H. -M. and Lucas,
"Validation of CFD models for mono- and polydisperse air-water two-phase flows in pipes"
J. Nuclear Engineering & Design, Vol. 238, pp. 647–659, March 2008.
178
Lighthill, M. J.,
"On sound generated aerodynamically. I. General theory"
Proc. R. Soc. Series A, Vol. 211, p. 564, 1952.