18.8. References 141-160

141

Ferziger, J. H. and Peric, M.,

"Computational methods for fluid dynamics",

Springer, Berlin.

142

Menter, F. R. and Esch T.,

"Elements of Industrial Heat Transfer Predictions",

16th Brazilian Congress of Mechanical Engineering (COBEM), Nov. 2001, Uberlandia, Brazil.

143

Menter, F.,

"CFD Best Practice Guidelines for CFD Code Validation for Reactor Safety Applications",

Evaluation of Computational Fluid Dynamic Methods for Reactor Safety Analysis (ECORA), European Commission, 5th EURATOM FRAMEWORK PROGRAMME, 1998-2002.

144

Menter F. R. and Egorov, Y.,

"Turbulence Models based on the Length-Scale Equation",

Fourth International Symposium on Turbulent Shear Flow Phenomena, Williamsburg, 2005 - Paper TSFP4-268, 2005.

145

Menter F. R. and Egorov, Y.,

"SAS Turbulence Modelling of Technical Flows",

DLES 6 - 6th ERCOFTAC Workshop on Direct and Large Eddy Simulation September, Poitiers, 2005.

146

Spalart P. R.,

"Strategies for turbulence modelling and simulations",

Int. J. Heat Fluid Flow, 21, pp. 252-263, 2000.

147

A. D. Gosman and E. Ioannides,

"Aspects of computer simulation of liquid fuelled combustors",

AIAA Paper, No. 81-0323,1981.

148

F. Bakir, R. Rey, A.G. Gerber, T. Belamri and B. Hutchinson,

"Numerical and Experimental Investigations of the Cavitating Behavior of an Inducer",

Int J Rotating Machinery, Vol. 10, pp. 15-25, 2004.

149

Frank, Th.,

"Parallele Algorithmen für die numerische Simulation dreidimensionaler, disperser Mehrphasenströmungen und deren Anwendung in der Verfahrenstechnik",

Habilitationsschrift, Shaker Verlag Aachen, pp. 1-329, 2002.

150

Hussmann, B. et al.,

"A stochastic particle-particle collision model for dense gas-particle flows implemented in the Lagrangian solver of ANSYS CFX and its validation",

6th International Conference on Multiphase Flows, ICMF 2007, Leipzig, Germany, 2007.

151

Oesterlé, B., Petitjean, A.,

"Simulations of particle-to-particle interactions in gas-solid flows",

Int. J. Multiphase Flow, Vol. 19(1), pp. 199-211, 1993.

152

Sommerfeld, M.,

"Modellierung und numerische Berechnung von partikelbeladenen Strömungen mit Hilfe des Euler-Lagrange-Verfahrens",

Habilitationsschrift, Shaker Verlag Aachen, 1996.

153

Lavieville, J., Deutsch, E. and Simonin, O.,

"Large eddy simulations of interactions between colliding particles and a homogeneous isotropic turbulence field",

ASME FED Vol. 228, pp. 359-369, 1995.

154

Sommerfeld, M.,

"Validation of a stochastic Lagrangian modeling approach for inter-particle collision in homogeneous isotropic turbulence",

Int. J. Multiphase Flow, Vol. 27, pp. 1829 – 1858, 2001.

155

Huh, K.Y., Lee, E.,

"Diesel Spray Atomization Models Considering Nozzle Exit Turbulence Conditions",

Atomization and Sprays, Vol. 8, pp. 453-469, 1998.

156

Chryssakis, C.A., Assanis, D.N.,

"A Secondary atomization Model for Liquid Droplet Deformations and Breakup under High Weber Number Conditions",

ILASS Americas, 18th Annual Conference on Liquid Atomization and Spray Systems, Irvine, CA, 2005.

157

Peng, D.Y. and Robinson, D.B.,

"A New Two-Constant Equation of State",

Ind. Eng. Chem. Fundam., Vol. 15, No. 1, pp. 59 – 64, 1976.

158

Chung, T.H., M. Ajlan, L.L. Lee and K.E. Starling,

"Generalized Multiparameter Correlation for Nonpolar and Polar Fluid Transport Properties",

Ind. Eng. Chem. Res., Vol. 27, pp. 671 – 679, 1988.

159

Kurul, N. and Podowski, M. Z.,

"On the modeling of multidimensional effects in boiling channels",

ANS Proc. 27th National Heat Transfer Conference, Minneapolis, MN, July 28-31, 1991.

160

Kocamustafaogullari, G. and Ishii, M.,

"Interfacial area and nucleation site density in boiling systems",

Int. J. Heat Mass Transfer, 26 p. 1377, 1983.