181
Wen, C. Y. and Yu, Y. H.,
"Mechanics of Fluidization"
Chem. Eng. Prog. Symp. Ser. 62, pp. 100-111, 1966.
182
Choi, C. R. and Huh, K. Y.,
"Development and validation of a coherent flamelet model for a spark-ignited turbulent premixed flame in a closed vessel,"
Combustion & Flame Vol. 114, No. 3-4, 336-348, 1998.
183
A. M. Douaud, P.Eyzat,
"Four-Octane-Number Method for Predicting the Anti-Knock Behavior of Fuels and Engines",
SAE Technical Paper 780080, SAE, 1978.
184
M. P. Halstead, L. J. Kirsch, C. P. Quinn,
"The Autoignition of Hydrocarbon Fuels at High Temperatures and Pressures – Fitting of a Mathematical Model",
Combustion and Flame, Vol. 30, pp. 45-60, 1977.
185
H. O. Hardenberg, F.W. Hase,
"An Empirical Formula for Computing the Pressure Rise Delay of a Fuel from Its Cetane Number and from the Relevant Parameters of Direct-Injection Diesel Engines",
SAE Technical Paper 790493, SAE, 1979.
186
Meneveau, C., and Poinsot, T.,
"Stretching and quenching of flamelets in premixed turbulent combustion",
Combustion and Flame, 86:311-332, 1991.
188
Wallin, S. and Johansson A.,
"A complete explicit algebraic Reynolds stress model for incompressible and compressible flows",
Journal of Fluid Mechanics, 403, pp. 89-132, 2000.
189
Wallin, S., and Johansson A.,
"Modelling streamline curvature effects in explicit algebraic Reynolds stress turbulence models",
International journal of Heat and Fluid Flow, 23(5), pp. 721-730, 2002.
190
Hellsten, A.,
"New advanced
turbulence model for high-lift aerodynamics",
AIAA Paper 2004-1120, Reno, Nevada, 2004.
191
Spalart, P.R., and Shur, M.
"On the sensitization of turbulence models to rotation and curvature",
Aerospace Sci. Tech., 1(5), pp. 297-302, 1997.
192
Smirnov, P.E., and Menter, F.R.
"Sensitization of the SST turbulence model to rotation and curvature by applying the Spalart-Shur correction term",
ASME Paper GT 2008-50480, Berlin, Germany, 2008.
193
Coleman, H.W., Hodge, B.K., Taylor, R.P.,
"A Re-Evaluation of Schlichting’s Surface Roughness Experiment",
Journal of Fluids Engineering, Vol. 106, 1984.
194
Lechner, R., and Menter, F.,
"Development of a rough wall boundary condition for
-based turbulence models",
Technical Report ANSYS / TR-04-04, 2004.
195
Pimenta, M.M., Moffat, R.J. and Kays, W.M.,
" The Turbulent Boundary Layer: An Experimental Study of the Transport of Momentum and Heat with the Effect of Roughness",
Interim Report Stanford University, CA, 1975.
196
Launder, B.E.,
"Second-moment closure: present … and future".
Int. J. Heat and Fluid Flow, Vol. 10, No. 4, pp. 282-300, 1989.
197
Egorov, Y., and Menter, F.,
"Development and Application of SST-SAS Turbulence Model in the DESIDER Project",
Second Symposium on Hybrid RANS-LES Methods, Corfu, Greece, 2007.
198
Germano, M., Piomelli, U., Moin, P., Cabot, W.H.,
"A Dynamic Subgrid-Scale Eddy Viscosity Model",
Phys. Fluids A 3 (7), pp. 1760-1765, 1991.