TALLOW
TALLOW, TEMP1, TEMP2, TEMP3, TEMP4, TEMP5, TEMP6
Defines the temperature table for safety factor calculations.
Valid Products: Pro | Premium | Enterprise | PrepPost | Solver | AS add-on
TEMP1,TEMP2,TEMP3, . . . ,TEMP6Input up to six temperatures covering the range of nodal temperatures. Temperatures must be input in ascending order.
Notes
Defines the temperature table for safety factor calculations (SFACT, SALLOW). Use STAT command to list current temperature table. Repeat TALLOW command to zero table and redefine points (6 maximum).
Safety factor calculations are not supported by PowerGraphics. Both the SALLOW and TALLOW commands must be used with the Full Model Graphics display method active.