RPR4

RPR4, NSIDES, XCENTER, YCENTER, RADIUS, THETA, DEPTH
Creates a regular polygonal area or prism volume anywhere on the working plane.

Valid Products: Pro | Premium | Enterprise | PrepPost | Solver | AS add-on

NSIDES

The number of sides in the polygon or prism face. Must be greater than 2.

XCENTER, YCENTER

Working plane X and Y coordinates of the center of the polygon or prism face.

RADIUS

Distance (major radius) from the center to a vertex of the polygon or prism face (where the first keypoint is defined).

THETA

Angle (in degrees) from the working plane X-axis to the vertex of the polygon or prism face where the first keypoint is defined. Used to orient the polygon or prism face. Defaults to zero.

DEPTH

The perpendicular distance (either positive or negative based on the working plane Z direction) from the working plane representing the depth of the prism. If DEPTH = 0 (default), a polygonal area is created on the working plane.

Notes

Defines a regular polygonal area anywhere on the working plane or prism volume with one face anywhere on the working plane. The top and bottom faces of the prism are polygonal areas. See the RPOLY, POLY, RPRISM, and PRISM commands for other ways to create polygons and prisms.

Menu Paths

Main Menu>Preprocessor>Modeling>Create>Areas>Polygon>Hexagon
Main Menu>Preprocessor>Modeling>Create>Areas>Polygon>Octagon
Main Menu>Preprocessor>Modeling>Create>Areas>Polygon>Pentagon
Main Menu>Preprocessor>Modeling>Create>Areas>Polygon>Septagon
Main Menu>Preprocessor>Modeling>Create>Areas>Polygon>Square
Main Menu>Preprocessor>Modeling>Create>Areas>Polygon>Triangle
Main Menu>Preprocessor>Modeling>Create>Volumes>Prism>Hexagonal
Main Menu>Preprocessor>Modeling>Create>Volumes>Prism>Octagonal
Main Menu>Preprocessor>Modeling>Create>Volumes>Prism>Pentagonal
Main Menu>Preprocessor>Modeling>Create>Volumes>Prism>Septagonal
Main Menu>Preprocessor>Modeling>Create>Volumes>Prism>Square
Main Menu>Preprocessor>Modeling>Create>Volumes>Prism>Triangular