RFORCE
RFORCE, NVAR, NODE, Item, Comp, Name
Specifies the total reaction force data to be stored.
NVARArbitrary reference number assigned to this variable (2 to NV (NUMVAR)). Overwrites any existing results for this variable.
NODENode for which data are to be stored. If
NODE= P, graphical picking is enabled (valid only in the GUI).ItemLabel identifying the item. Valid item labels are shown in the table below. Some items also require a component label.
CompComponent of the item (if required). Valid component labels are shown in the table below.
NameThirty-two character name identifying the item on printouts and displays. Defaults to an eight character label formed by concatenating the first four characters of the
ItemandComplabels.
Notes
Defines the total reaction force data (static, damping, and inertial components) to be stored from single pass (ANTYPE,STATIC or TRANS) solutions or from the expansion pass of mode-superposition (ANTYPE,HARMIC or TRANS) solutions.
Table 227: RFORCE - Valid Item and Component Labels
| Valid item and component labels for node results are: | ||
|---|---|---|
| Item | Comp | Description |
| F | X,Y,Z | X, Y, or Z structural force |
| M | X,Y,Z | X, Y, or Z structural moment |
| HEAT[1] | Heat flow | |
| FLOW | Fluid flow | |
| AMPS | Current flow | |
| FLUX | Magnetic flux | |
| CSG | X,Y,Z | X, Y, or Z magnetic current segment component |
| RATE | Diffusion flow rate | |
| VLTG | Voltage drop | |
| CURT | Current | |
| CHRG | Charge | |