NUMSTR

NUMSTR, Label, VALUE
Establishes starting numbers for automatically numbered items.

Valid Products: Pro | Premium | Enterprise | PrepPost | Solver | AS add-on

Label

Apply starting number to one of the following sets of items:

NODE

 — 

Node numbers. Value defaults (and is continually reset) to 1 + maximum node number in model. Cannot be reset lower.

ELEM

 — 

Element numbers. Value defaults (and is continually reset) to 1 + maximum element number in model. Cannot be reset lower.

KP

 — 

Keypoint numbers. Value defaults to 1. Only undefined numbers are used. Existing keypoints are not overwritten.

LINE

 — 

Line numbers. Value defaults to 1. Only undefined numbers are used. Existing lines are not overwritten.

AREA

 — 

Area numbers. Value defaults to 1. Only undefined numbers are used. Existing areas are not overwritten.

VOLU

 — 

Volume numbers. Value defaults to 1. Only undefined numbers are used. Existing volumes are not overwritten.

DEFA

 — 

Default. Returns all starting numbers to their default values.

VALUE

Starting number value.

Notes

Establishes starting numbers for various items that may have numbers automatically assigned (such as element numbers with the EGEN command, and node and solid model entity numbers with the mesh like AMESH, VMESH, etc.. Use NUMSTR,STAT to display settings. Use NUMSTR,DEFA to reset all specifications back to defaults. Defaults may be lowered by deleting and compressing items (that is, NDELE and NUMCMP,NODE for nodes, etc.).

Note:  A mesh clear operation (VCLEAR, ACLEAR, LCLEAR, and KCLEAR) automatically sets starting node and element numbers to the highest unused numbers. If a specific starting node or element number is desired, issue NUMSTR after the clear operation.

Menu Paths

Main Menu>Preprocessor>Numbering Ctrls>Reset Start Num
Main Menu>Preprocessor>Numbering Ctrls>Set Start Number
Main Menu>Preprocessor>Numbering Ctrls>Start Num Status