AGEN
AGEN, ITIME, NA1, NA2, NINC, DX, DY, DZ, KINC, NOELEM, IMOVE
Generates additional areas from a pattern of areas.
ITIMEDo this generation operation a total of
ITIMEs, incrementing all keypoints in the given pattern automatically (or byKINC) each time after the first.ITIMEmust be more than 1 for generation to occur.NA1,NA2,NINCGenerate areas from the pattern of areas
NA1toNA2(defaults toNA1) in steps ofNINC(defaults to 1). IfNA1= ALL,NA2andNINCare ignored and the pattern is all selected areas (ASEL). IfNA1= P, graphical picking is enabled and all remaining arguments are ignored (valid only in the GUI). A component name may also be substituted forNA1(NA2andNINCare ignored).DX,DY,DZKeypoint location increments in the active coordinate system (--, D θ, DZ for cylindrical; --, D θ, -- for spherical).
KINCKeypoint number increment between generated sets. If zero, the lowest available keypoint numbers are assigned (NUMSTR}.
NOELEMSpecifies if elements and nodes are also to be generated:
0
—
Generate nodes and elements associated with the original areas, if they exist.
1
—
Do not generate nodes and elements.
IMOVESpecifies whether to redefine the existing areas:
0
—
Generate new areas as requested with the
ITIMEargument.1
—
Move original areas to new position, retaining the same keypoint numbers (
ITIME,KINC, andNOELEMare ignored). If the original areas are needed in the original position (for example, they may be attached to a volume), they are not moved, and new areas are generated instead. Meshed items corresponding to moved areas are also moved if not needed at their original position.
Notes
Generates additional areas (and their corresponding keypoints, lines and mesh) from a given area pattern. The MAT, TYPE, REAL, ESYS, and SECNUM attributes of the new areas are based upon the areas in the pattern and not upon the current settings of the pointers. End slopes of the generated lines remain the same (in the active coordinate system) as those of the given pattern. For example, radial slopes remain radial. Generations which produce areas of a size or shape different from the pattern (that is, radial generations in cylindrical systems, radial and phi generations in spherical systems, and theta generations in elliptical systems) are not allowed. Solid modeling in a toroidal coordinate system is not recommended. Area and line numbers are automatically assigned, beginning with the lowest available values (NUMSTR).