This procedure shows how to set the calculation parameters of the time-frequency representation.
To set the Time-Frequency Calculation:
Prerequisites: You need a time-frequency representation.
-
Click
.
-
From the Window type drop-down list, select a standardized window type to observe the time-frequency representation.
-
From the FFT
size drop-down list, select the frequency bands for
the time frequency representation.
-
Enter an Overlap value
to specify the degree of overlapping of two successive windows on which the time-frequency is
calculated.
-
If needed, change the Windows size.
-
If needed, select Automatically
apply to all TF windows.
-
Click OK.
The calculation parameters of the time-frequency representation are set.