Preparing Cursors

This procedure shows how to add cursors to a temporal signal or a spectrum to split the signal and prepare it for listening.

To Prepare Cursors:

Prerequisites: You need to open a temporal signal or spectrum .
  1. Select a signal.
  2. Click Show/Hide panel in the signal window.
  3. Select the Cursors tab.
  4. If you want to add cursors one by one, click Add cursor .

    A cursor is added in the signal. The cursor symbol is activated and blue .

    1. Click and drag the cursor to the required position in the signal.
    2. Click the Blue cursor to validate the position of the cursor.

      The cursor symbol turns gray.

  5. If you want to add multiple, equally-spaced cursors, click Add a set of cursors .
    1. Enter the interval length in milliseconds in the Add equally-spaced cursors dialog box.
    2. Click OK.
  6. If you are preparing a spectrum, click to add a cursor at the maximum value of a spectrum.

The temporal signal or spectrum is prepared with cursors and ready for listening.