Defining Frequency Bands with Cursors

This procedure shows how to use cursors to define frequency bands for a spectrum.

To Define Frequency Bands with Cursors:

  1. Open or calculate a spectrum.
  2. Click the spectrum.
  3. In the lateral panel, click Cursors.
  4. Click Add cursor to add cursors one by one.

    The cursors are displayed in the spectrum and the numbered button of the cursor is blue.

  5. Click and drag the cursor to the required location in the spectral signal.
  6. Click the blue button to validate the location of the cursor.
  7. Repeat the operation until all the cursors are placed.

The frequency bands of the spectrum are marked out with cursors.