Prerequisites: You must have added a simulation to the optimization.
In the Optimization definition, in the Variables panel, select the
Design variables tab.
Click to open the Design
variables list.
The list shows you the available numerical parameters that you can add as variable that
come from the Optical Part Design features included in the simulation.
Check the parameters to vary.
Tip: In case of a simulation containing a large number of numerical parameters, you
can use the filter tool to help you quickly find the parameters.
Close the Design variables list.
Variables appear into the Design variables tab.
In the Design variables tab, for each variable, set the Min
value and Max value to define the range of values the variable
can take.
The Current value must be set between the Min
value and Max value: Min value < Current value < Max
value