Adding Reports to a Schematic

Twin Builder can add several types of reports directly onto a schematic. You can modifiy and update these plots in the same way as those displayed under Results in the Project tree.

Follow this procedure to place a report on a schematic:

1. Select the schematic so that the Draw menu appears in the menu bar.
2. Select Draw > Report > report_type, where report type can be: Rectangular Plot, DataTable, Digital Plot, Rectangular Stacked Plot, Numeric Display, Rectangular Contour Plot, 3D Rectangular Plot, Polar Plot, Bode Plot, or Nyquist Plot and move the cursor over the schematic.

Alternatively, click Standard Report on the Results ribbon and click the icon for the desired report.

The mouse drags a hollow rectangular box with the cursor at the center.

3. Click the mouse at the location where you want to place the report.

The report appears on the schematic and the Report dialog box displays enabling traces to be added immediately. An entry for the report also appears in the Results folder of the Project Manager.

Related Topics 

Modifying an On-sheet Report

Opening an On-sheet Report in a New Window

Generating Reports and Postprocessing

Creating Rectangular Plots

Creating 3D Rectangular Plots

Creating Polar Plots

Creating Rectangular Stacked Plots

Creating a Rectangular Contour Plot

Creating a Bode Plot

Creating a Nyquist Plot

Creating a Digital Plot

Creating a Data Table or Numeric Display