Viewing Maxwell Design Details
Once you insert a Maxwell design into a project, it is listed as the second node in the project tree. It is named MaxwellModeln by default, where n is the order in which the design was added to the project. Expand the design icon in the project tree to view specific data about the model.
The MaxwellModeln node contains the following project details:
|
3D Components |
Lists any 3D components added to the design. |
|
Model |
Allows you to display the design list, define motion setup, and set the symmetry multiplier. For Transient solutions only, when the Model icon is selected, the Properties window displays a Motion Variables tab showing Speed and Direction variables values (not user-editable) if a motion setup has been defined. |
|
Boundaries |
Allows you to define boundary conditions on selected faces. |
|
Excitations |
Allows you to define voltage and current sources on selected objects. |
|
Parameters |
Allows you to assign executive parameters to solve for (such as force and torque). |
|
Mesh |
Displays the mesh operations specified for objects or object faces. Mesh operations are optional mesh refinement settings that are specified before a mesh is generated. |
|
Analysis |
Displays the solution setups for a Maxwell design. A solution setup specifies how Maxwell computes the solution. |
|
Optimetrics |
Displays any Optimetrics setups added to a Maxwell design. |
|
Results |
Displays any post-processing reports that have been generated. |
|
Field Overlays |
Displays field overlay plots, which are representations of basic or derived field quantities on surfaces or objects. Plot folders are listed under Field Overlays. These folders store the project's plots and can be customized. See Setting Field Plot Defaults for information on how to customize the plot folders. |
In the project tree, an "unknown" section lists objects that are not solid, sheet, or wire.