Choosing the Movement Mode

When drawing objects, the cursor's location is always relative to a reference point. The reference point is displayed with a mini xyz-axis:

To change the reference point, move the cursor to the desired point and press Ctrl+Enter.

You can move the cursor to one of the following points:

• In the same plane as the reference point (in-plane movement mode).
• Perpendicular to the reference point (out-of-plane movement mode).
• If an object is present to snap to a point in 3D space (3D movement mode).
• Along the X Axis
• Along the Y Axis
• Along the Z Axis

Changes you make to the movement mode persist until you change them again.