Moving the Cursor Out of Plane

To move the cursor to a point on a line that is perpendicular to the drawing plane and that intersects the reference point:

1. After clicking the desired drawing command.
2. Do one of the following:

• click Modeler > Movement Mode > Out of Plane.
• In the model view window, right-click and select Movement Mode > Out of Plane.

A dashed line is displayed between the reference point and the cursor's location, which is now on a line that is perpendicular to the drawing plane and that intersects the reference point.

The cursor's location, displayed with a black diamond that indicates it has snapped to a grid, is on a line that is perpendicular to the drawing plane and that intersects the reference point.