Transmission properties should be input in this tab.
Figure 14.332: Transmission tab parameters
| Parameter | Description | Dimension |
| 1. Gear ratio | Use to set the gear ratio of the transmission. If your model has multi power flow, you should input the gear ratio for each flow. | N/A |
| 2. Final gear ratio | Use to set the final gear ratio. | N/A |
| 3. Open file |
Use to set the shift map. The file format is csv as shown below.
The first column is APS, the next n-1 columns are shift up profiles, and n-1 columns after that are shift down profiles. Where, n is the number of gear steps. | N/A |
| 4. 2D chart | The shift map is shown in a 2D chart. | N/A |