APLOT

APLOT, NA1, NA2, NINC, DEGEN, SCALE
Displays the selected areas.

Valid Products: Pro | Premium | Enterprise | PrepPost | Solver | AS add-on

NA1, NA2, NINC

Displays areas from NA1 to NA2 (defaults to NA1) in steps of NINC (defaults to 1). If NA1 = ALL (default), NA2 and NINC are ignored and all selected areas (ASEL) are displayed.

DEGEN

Degeneracy marker:

(blank)  

 — 

No degeneracy marker is used (default).

DEGE  

 — 

A red star is placed on keypoints at degeneracies (see the Modeling and Meshing Guide ). Not available if /FACET,WIRE is set.

SCALE

Scale factor for the size of the degeneracy-marker star. The scale is the size in window space (-1 to 1 in both directions) (defaults to .075).

Notes

This command is valid in any processor. The degree of tessellation used to plot the selected areas is set through the /FACET command.

Menu Paths

Main Menu>Preprocessor>Modeling>Check Geom>Show Degeneracy>Plot Degen Areas
Main Menu>Preprocessor>Modeling>Operate>Booleans>Show Degeneracy>Plot Degen Areas
Utility Menu>Plot>Areas
Utility Menu>Plot>Specified Entities>Areas