This feature allows the transfer of either of the following thermal solutions from a CFD solution boundary to a corresponding face in the Mechanical application model:
Temperatures at the fluid-structure interface.
Film coefficients and bulk temperature values at the fluid-structure interface.
The import process involves interpolating a CFD solution onto the Mechanical application face mesh. This requires that the following conditions are met:
The fluid-structure interface must be a defined boundary in CFD.
The location of the CFD boundary (with respect to the global Cartesian coordinate system) must be the same as the corresponding face(s) in the Mechanical application model.
Refer to the Imported Loads section for more information.