Table 5: Participant Support of System Coupling Capabilities shows participant support of the key coupling capabilities available for System Coupling's graphical user interface (GUI), System Coupling's command-line interface (CLI), and System Coupling in Workbench (WB).
Participant-specific support is listed for the following coupling participants:
Table 5: Participant Support of System Coupling Capabilities
Category | Capability | GUI | CLI | WB | |
---|---|---|---|---|---|
Analysis |
Eddy Current (3D) |
✓ |
✓ | ||
Transient (2D & 3D) |
✓ |
✓ | |||
Setup |
Multiple regions per interface side |
✓ |
✓ | ||
Define motion on coupled bodies |
✓ |
✓ | |||
System Coupling time-dependent conditions |
✓ |
✓ | |||
Time-dependent excitations and/or motion (for Eddy-Current 3D analyses) |
✓ |
✓ | |||
Transfer Quantities |
Volume outputs:
|
✓ |
✓ | ||
Volume inputs:
|
✓ |
✓ | |||
Surface outputs:
|
✓ |
✓ | |||
Surface inputs:
|
✓ |
✓ | |||
Execution |
Participant update frequency controls (for steady coupled analyses) |
✓ |
✓ | ||
Mesh updates and remapping per step (for System Coupling time-dependent solutions) |
✓ |
✓ | |||
HPC parallel distribution command-line options |
✓ |
✓ | |||
Restart points written per coupling step |
✓ |
✓ | |||
Analysis |
Steady |
✓ |
✓ |
✓ | |
Transient |
✓ |
✓ |
✓ | ||
Transfer Quantities |
Surface outputs:
|
✓ |
✓ |
✓ | |
Surface inputs:
|
✓ |
✓ |
✓ | ||
Execution |
Participant update frequency controls1 |
✓ |
✓ | ||
Participant update frequency controls1 Automatic detection of same interface sides for thin bodies |
✓ |
✓ | |||
Analysis |
Steady |
✓ |
✓ |
✓ | |
Transient |
✓ |
✓ |
✓ | ||
Iteration-based analyses |
✓ |
✓ | |||
Setup |
Customizable solver input files for initial and restarted coupled analysis runs |
✓ |
✓ | ||
Multiple regions per interface side |
✓ |
✓ | |||
Define motion on coupled bodies |
✓ |
✓ | |||
Transfer Quantities |
Surface outputs:
|
✓ |
✓ |
✓ | |
Surface inputs:
|
✓ |
✓ |
✓ | ||
Volume outputs:
|
✓ |
✓ | |||
Volume inputs:
|
✓ |
✓ | |||
Execution |
Participant update frequency controls1 |
✓ |
✓ | ||
Automatic detection of same interface sides for thin bodies |
✓ |
✓ | |||
Mesh reimport and remapping per step (when triggered by an AEDT participant) |
✓ |
✓ | |||
Restart points written per coupling iteration |
✓ |
✓ | |||
Analysis |
Steady |
✓ |
✓ | ||
Transient |
✓ |
✓ | |||
Iteration-based analyses |
✓ |
✓ | |||
Setup |
Multiple regions per interface side |
✓ |
✓ | ||
Transfer Quantities |
Surface outputs:
|
✓ |
✓ | ||
Surface inputs:
|
✓ |
✓ | |||
Execution |
Participant update frequency controls1 |
✓ |
✓ | ||
Automatic detection of same interface sides for thin bodies |
✓ |
✓ | |||
Restart points written per coupling iteration |
✓ |
✓ | |||
Analysis |
Steady |
✓ |
✓ |
✓ | |
Transient |
✓ |
✓ |
✓ | ||
Setup |
Customizable solver input files for restarted coupled analysis runs |
✓ |
✓ | ||
Transfer Quantities |
Surface outputs:
|
✓ |
✓ |
✓ | |
Surface inputs:
|
✓ |
✓ |
✓ | ||
Volume outputs:
|
✓ |
✓ | |||
Volume inputs:
|
✓ |
✓ | |||
Execution |
Participant update frequency controls1 |
✓ |
✓ | ||
Automatic detection of same interface sides for thin bodies |
✓ |
✓ | |||
Mesh reimport and remapping per step (when triggered by an AEDT participant) |
✓ |
✓ | |||
CFD Server |
Analysis |
Steady |
✓ |
✓ | |
Setup |
Add aerodamping data transfer groups |
✓ |
✓ | ||
Multiple regions per interface side |
✓ |
✓ | |||
Check for changes to participant input file |
✓ |
✓ | |||
Update participant after input file modifications |
✓ |
✓ | |||
Participant instancing |
✓ |
✓ | |||
Transfer Quantities |
Surface inputs:
|
✓ |
✓ | ||
Execution |
Mapping mode | ✓ | ✓ | ||
Mechanical Server |
Analysis |
Steady | ✓ | ✓ | |
Setup |
Add aerodamping data transfer groups | ✓ | ✓ | ||
Multiple regions per interface side |
✓ |
✓ | |||
Check for changes to participant input file |
✓ |
✓ | |||
Update participant after input file modifications |
✓ |
✓ | |||
Transfer Quantities |
Surface outputs:
|
✓ |
✓ | ||
Execution |
Mapping Mode | ✓ | ✓ | ||
Analysis |
Steady |
✓ | ✓ | ||
Transient |
✓ |
✓ | |||
Outputs:
|
✓ |
✓ | |||
Inputs:
|
✓ |
✓ | |||
Execution |
Restart points written per coupling iteration | ✓ | ✓ | ||
SCDT Server | Analysis | Steady |
✓ |
✓ | |
Transient4 |
✓ |
✓ | |||
Setup |
Multiple regions per interface side |
✓ |
✓ | ||
Transfer Quantities |
All supported quantities |
✓ |
✓ | ||
Execution |
HPC execution |
✓ |
✓ | ||
1: This is a beta-level capability. For more information about beta functionality, see the System Coupling Beta Features documentation. 2: FMU participants support single-valued scalar transfer quantities. 3: All noted outputs/inputs are supported for surfaces and
volumes involved in a transfer with an FMU region (with
Topology set to 4: Transient analysis subject to certain limitations as documented in the SCDTFileFormatSPecification.md file. |
For information on a given participant's support for System Coupling capabilities, see its coupling-related product documentation:
"System Coupling Analyses Using Maxwell" in the Maxwell Help
Coupling CFX to an External Solver: System Coupling Simulations in the CFX-Solver Manager User's Guide
Performing System Coupling Simulations Using Fluent in the Fluent User's Guide
System Coupling in the Forte User's Guide
System Coupling in the Mechanical User's Guide
The SCDTFileFormatSPecification.md Markdown file available in
<Installation Path>
\v242\SystemCoupling\Participants\ScdtServer. You can view this file with any Markdown-compatible reader.