Creating Midsurface Faces Based on an Offset Range
- Click Midsurface in the Define group on the Prepare tab.
-
Select Use range in the Options
panel.
The face pairs with offset distances within the range are automatically detected. If you have face pairs selected, the range will automatically change to include the offset distance.
- Select the body for which you want to detect offset face pairs.
-
Change the Minimum thickness and
Maximum thickness values in
the Options panel as needed.
Face pairs within this range will be selected, while face pairs outside this range will be removed from the selection.
- Click the Complete tool guide when you are finished selecting faces.