General
Enable constraint based sketching |
Select this option to enable constraint based sketching. You need to restart SpaceClaim to use constraint-based sketching. |
Animate changes to view projection |
Select this option to animate the steps when you select a view. |
Animate configuration change |
Select this option to dynamically show you the parts moving on screen when switching between configurations. |
Auto-extrude/revolve sketches in Section mode |
Select this option to automatically extrude or revolve in section mode. As you sketch in Section mode, lines that begin on an existing edge are extruded to form surfaces, and closed surfaces form solids. If the line begins on a solid, the line is finished automatically when you click another point on the solid. To automatically revolve, the sketch must be attached to a revolved face. |
Maximum undo steps |
Type the number of actions you want available for undo. It's recommended that this value be set to at least 50. To enable your changes, you must restart SpaceClaim. |
Language |
Select a language from the menu. The SpaceClaim user interface and online help display in the selected language. |
Reset All User Settings |
Reset all modifiable user settings to a default state. To apply the updated settings, you must restart SpaceClaim. |
Export User Settings |
Export a SpaceClaim
|
Import User Settings |
Apply non-default, customized selections that are unique to
an individual user. A valid SpaceClaim |