Meshing Objects Using Settings From a Previously Meshed Body

  1. (Optional) If desired, on the ribbon, click Play/Pause .
    To change any of the settings, or to apply options and settings selectively to geometry, you should Pause automatic updates.
  2. On the ribbon, click Add/Edit .
  3. Select the previously meshed body from which you want to reuse similar settings. Settings for that body are displayed in the Mesh Options panel.
  4. Now select the body(s) that you want to mesh using the settings as defined in the previous step.
  5. (Optional) Modify any setting as you deem appropriate.
  6. (Optional) In certain situations, you may want to select source and target imprint surfaces .
  7. When all settings are satisfactory, click Complete .
    In Play mode, when you click Complete, the selected objects are blocked and the mesh is calculated.
    In Pause mode, the selected objects are blocked when you click Complete, but you must return to Play mode to generate the mesh.