Drawing a Spline on a Sketch Plane

  1. Click Spline in the Sketch group.
  2. If a sketch plane is not active, click an object or objects in the Design window to make a sketch plane.
  3. Click to set the first point of the spline.
    Hold Alt and click to set the point if you want it to be tangent with an adjacent sketch or edge. When highlighting the vertex (which is actually an end point of one of the intersecting edges which has influence at the time) scroll the mouse wheel to select other adjacent edges with which to set the tangent vector direction, as previewed by the green tangency symbol.
  4. Click to set the next points of the spline.
    You can dimension spline points by entering the coordinate distance from the start point to each point, or dimension each point relative to another sketch object.
  5. End the spline:

    • Double-click to set the end point of the spline.

    • Hold Alt and click to make the end point tangent with an adjacent sketch or edge.

    • Right-click and select Finish Spline.

    • Press Esc.

    • Connect the end point to the start point.

    • Click any other tool (except the Clipboard and Orient tools).

The common sketch options are described in Sketch Tool Guides and Options.