Sandia_Engine_LTC_EarlyInj.ftsim: This project file is completely configured and set-up, including an Ansys Forte sector mesh, chemistry mechanism, engine specifications, operating conditions, initial and boundary conditions, fuel spray parameters and other simulation settings. The file extension ftsim is for an Ansys Forte simulation case. This project is used in the first exercise in Loading a Preconfigured Project .

Sandia.fmsh: An Ansys Forte mesh file for the Sandia engine. The mesh represents a 45-degree sector of the engine cylinder, with periodic boundaries. The format of this type of mesh for Ansys Forte is KIVA-3V-compatible, and such a mesh can be exported as an option from several commercial structured-mesh generators, such as ICEM-CFD and GAMBIT. It can also be created directly within Ansys Forte using the guided Sector Mesh Generator option.

InjectionProfile.csv: Data describing the spray injection. The data can be imported from this file through the User Interface or manually entered once you reach the Spray node on the Workflow tree through use of the Profile Editor tool.

sandia_bowl_profile.csv: Data describing the piston bowl shape. This profile can be imported or manually entered in the Profile Editor for use by the Sector Mesh Generator to define the bowl shape.

UserCrankAngleOutputs.csv: Table of data that contains crank angles going from -22 to +20.